Ini Hydraulic Co., Ltd.
Main products:Hydraulic Motor,Hydraulic Winch,Hydraulic Capstan,Hydraulic Transmission Drive,Hydraulic System
Products
Contact Us
  • Contact Person : Ms. Fang Jessie
  • Company Name : Ini Hydraulic Co., Ltd.
  • Tel : 86-574-86115136
  • Fax : 86-574-86115082
  • Address : Zhejiang,ningbo,No.288 Batou xi road Ningbo P.R.China
  • Country/Region : China
  • Zip : 315806

INI staffa HMB type Low speed high torque hydraulic motors

INI staffa HMB type Low speed high torque hydraulic motors
Product Detailed
1. High efficiency 2. good reliability, Long lifetime 4. Wide range of speed, low noise 5. replaceable with staffa HMB motor

IMB series fixed diaplacement radial piston hydraulic motors are replaceable with HMB series motors of Staffa. Our motor range varies from 988 cc/rev to 6807 cc/rev displacement. 

• Main features are as follows:

Hydrostatic balance is built between the connecting rod and eccentric so that the connecting rod won’t be crushed by rollers. The motor can hold higher pressure, and have higher speed and power.low noise,good reliabilityWe adpot special heat treatment process and hydrostatic balance structure between the connecting rod and piston to reduce the friction loss during load transmission.The piston seal ring is special in structure and it can reduce the friction and improve the volumetric efficiency.We use hydrostatic balance axle oil distributor, and the axle can rotate without touching the oil through plate, so the lifetime will be extended and noise lowered.

Application:

ship and deck machinery, construction machinery and equipment, plastic injection machine, heavy metallurgical machinery. 

Relevant technical date:

Outline dimension

             

 NOTE:

1.Before starting up at the first time,filled the motor casing with clean hydraulic oil to promise the lubrication effect of each motion face. The step can be removed if selected motor is without drain port.

2.The hydraulic motor can be installed at any position. The support frame should have enough strength. The output shaft and connected transmission shaft must ensure to be aligned when installed.

3.The maxmum position of drain line should be higher than the central line of motor casing to avoid draining off. When output shaft of motor is upward, return oil check valve (0.1MPa) can is availalbe at drain port to ensure lubrication parts of motor. It should be remark when order.

4. Filtration: recommended filters of 25u for industrial application.Viscosity:best performance can be acquired only in good viscosity condition.Motor can get satisfied work performance when running at 15-1000cst for most working conditions.

5.Leakage: usually drain port should be connected to tank alone.Please contact us if the customer requests to eliminate drain line, but the backpressure of main return line should be less than 0.8Mpa.

6.The cleannes of connection joint should be guaranteed. Not allowing the dirty particle into motor.

7.Reduction of radial and axial load on the output shaft of motor can prolong lifetime of motor.

Company Show

INI staffa HMB type Low speed high torque hydraulic motors



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.